High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Dendritic molecular capsules for hydrophobic compounds

Reichardt's dye, a highly solvatochromic dye, was encapsulated within poly (glycerol succinic acid) ([Gn]-PGLSA-OH) dendrimers to investigate the interior environment of these dendritic macromolecules. The absorption maximum for the encapsulated Reichardt's dye in water was indicative of a relatively high dielectric constant present within the dye/dendrimer complex. (1)H NMR of the encapsulated complex showed the presence of aromatic protons from Reichardt's dye along with the aliphatic protons of the dendrimer. Additionally, there were substantial changes in T(1) and T(2) times of the encapsulated dye when compared with the free dye, and (1)H NOESY spectra for the complex showed a significant number of intermolecular NOE cross-peaks. These data reveal the close through-space proximity of the dye to the dendrimer and the restricted motion of the encapsulated dye. To demonstrate the potential use of these macromolecules as drug delivery vehicles, the poorly water-soluble anticancer drug 10-hydroxycamptothecin (10HCPT) was encapsulated within a carboxylated PGLSA dendrimer ([G4]-PGLSA-COONa). Cytotoxicity assays with human breast cancer cells showed a significant reduction of cell viability, demonstrating that 10HCPT retains activity upon encapsulation.     

Simultaneous analysis of oxidized and reduced glutathione in cell extracts by capillary zone electrophoresis

Glutathione (GSH) and glutathione disulfide (GSSG) levels in cells constitute a thiol redox system. They can be used as an indicator of oxidative stress of the cell. In this study, a capillary zone electrophoresis (CZE) method is described that enables quantitation of GSH and GSSG from cellular extracts. The CZE buffer used was 20 mM ammonium acetate containing 5% (v/v) acetic acid at pH 3.1 in conjunction with a polybrene coated capillary operated in reverse polarity mode. Effects of different acids used to prepare cell samples were investigated on CZE performance. The acids include meta phosphoric acid (MPA), trichloroacetic acid (TCA), phosphoric acid (PA) and sulfosalicylic acid (SSA) and are used to stabilize GSH and GSSG before performing CZE analysis. The method features a limit of detection of 4 microM and a limit of quantitation of 12 microM for both GSSG and GSH and recoveries of 94% for GSH and 100% for GSSG. Quantitative analysis of GSSG and GSH in HaCaT cell extracts (5% SSA, w/v) was performed with this method and changes in the ratio of GSH to GSSG in N-ethylmaleimide treated cell sample was observed by comparing with control cell samples.     

Advances in Catalysis. Volume 25; edited by D.D. Eley, H. Pines, and P.B. Weisz, Academic Press, New York, San Francisco and London, 1976, xii + 457 pages, $42.50

Photolysis of 1,2-divinyl- and 1-phenyl-2-vinyltetramethyldisilane and 1-phenylethenylpentamethyldisilane has been investigated. All three compounds afforded a new type of silicon—carbon double-bonded intermediate via photorearrangement of a silyl group to the terminal carbon of a vinyl group.     

Mesoporous electrode material from alumina-stabilized anatase TiO2 for lithium ion batteries

A mesoporous electrode material whose structure is composed of anatase nanocrystals stabilized by alumina is reported. Powder X-ray diffraction shows the anatase phase only, but micro-Raman spectroscopy shows that the materials have a core-shell morphology with grains of bulk anatase covered by a thin rutile layer on the surface. This structure is unique when compared to analogous materials stabilized by zirconia (PNNL-1). Nitrogen adsorption isotherms demonstrate a monotonous increase in surface area and mesopore volume with increasing Al content. Thin film electrodes from these materials were characterized by lithium insertion electrochemistry. Cyclic voltammograms exhibit significant differences in Li accommodation in Al-free and Al-stabilized materials.     

Magnetism of metal cyanide networks assembled at interfaces

Studies of metal cyanide thin films prepared directly at interfaces are reviewed. The systems range from monolayers, single-layer analogs of Prussian blue-like networks, to bulk powders prepared as thin films. Monolayer networks are prepared at the air/water interface and transferred to solid supports using Langmuir-Blodgett film methods. Films of bulk materials are prepared directly on solid surfaces using a templated sequential deposition procedure. The magnetic properties of the films have been explored, and in some cases, these monolayers and surface films give rise to new behavior that is only possible because of the fabrication method or thin film architecture. The methods of synthesis can generate oriented samples, even when the materials are poorly crystalline. Furthermore, the interface-assembled networks are inherently anisotropic, leading to phenomena not present in the solid-state analogs, such as anisotropic photomagnetism in a thin film of Rb_jCo_k[Fe(CN)₆]_l·nH₂O.     

Hydrogen substitution effect on the solubility of perhalogenated compounds in ionic liquid [bmim][PF6]

Solubility behaviors of binary mixtures of CFCl₃ (R-11), CFCl₂-CF₂Cl (R-113), CHCl₃ (R-20), CDCl₃ (R-20-d), CHCl₂–CF₃ (R-123) with room-temperature ionic liquid [bmim][PF₆] (1-butyl-3-methylimidazolium hexafluorophosphate) have been investigated using the volumetric and cloud-point methods, since all the systems show liquid–liquid equilibria (LLE). Large immiscibility (LLE) gaps of the perhalogenated compounds (R-11 and R-113) in the ionic liquid have been drastically reduced by the addition of only one hydrogen (or deuterium) in these compounds. The R-123 + [bmim][PF₆] binary system belongs to the Type-V fluid behavior. Noticeably large negative values (−2 to −8 cm³ mol⁻¹) of the excess molar volume in the ionic liquid-rich side solution have been observed for all the present systems. Experimental LLE data have been well correlated by the use of the NRTL (non-random two liquid) activity coefficient model.     

Unusual monodentate binding mode of 2,2'-dipyridylamine (L) in isomeric trans-(acac)2RuII(L)2, trans-[(acac)2RuIII(L)2]ClO4, and cis-(acac)2RuII(L)2 (acac = acetylacetonate). synthesis, structures, and spectroscopic, electrochemical, and magnetic aspects

The reaction of cis-Ru(acac)2(CH3CN)2 (acac = acetylacetonate) with 2,2'-dipyridylamine (L) in ethanolic medium resulted in facile one-pot synthesis of stable [(acac)2RuIII(L)]ClO4 ([1]ClO4), trans-[(acac)2RuII(L)2] (2), trans-[(acac)2RuIII)L)2]ClO4 ([2]ClO4), and cis-[(acac)2RuII(L)2] (3). The bivalent congener 1 was generated via electrochemical reduction of [1]ClO4. Although in [1]+ the dipyridylamine ligand (L) is bonded to the metal ion in usual bidentate fashion, in 2/[2]+ and 3, the unusual monodentate binding mode of L has been preferentially stabilized. Moreover, in 2/[2]+ and 3, two such monodentate L's have been oriented in the trans- and cis-configurations, respectively. The binding mode of L and the isomeric geometries of the complexes were established by their single-crystal X-ray structures. The redox stability of the Ru(II) state follows the order 1 < 2 < 3. In contrast to the magnetic moment obtained for [1]ClO4, mu = 1.84 muB at 298 K, typical for low-spin Ru(III) species, the compound [2]ClO4 exhibited an anomalous magnetic moment of 2.71 muB at 300 K in the solid state. The variable-temperature magnetic measurements showed a pronounced decrease of the magnetic moment with the temperature, and that dropped to 1.59 muB at 3 K. The experimental data can be fitted satisfactorily using eq 2 that considered nonquenched spin-orbit coupling and Weiss constant in addition to the temperature-independent paramagnetism. [1]ClO4 and [2]ClO4 displayed rhombic and axial EPR spectra, respectively, in both the solid and the solution states at 77 K.